Specifications |
| Specifications | VR-3 | VR-4 | VR-4 Gen ][ |
| System Type | AIR™ (Acoustic Inversion Replication) | AIR™ (Acoustic Inversion Replication) | AIR™ (Acoustic Inversion Replication) |
| Circuit Type | GAIN™ with DRI™. Blend points | GAIN™ with DRI™. Blend points | GAIN™ with DRI™. Blend points |
| Enclosure Type | Two-module single enclosure with sand chamber | Two piece Stacking | Two piece Stacking |
| Driver Compliment | Aperiodically damped with rear vent | Aperiodically damped with dual enclosures & dual rear vents | Aperiodically damped with dual enclosures & dual rear vents |
| Bass Driver | 10" super-duty polypropylene carbon impregnated cone with 2" voice coil capable of dissipating 500 watts peak | 2 - 8" super-duty polypropylene with custom epoxy treated cone, rear cooling vent allows 600 watt peak power dissipation | 2 - 8" super-duty polypropylene with custom epoxy treated cone, rear cooling vent allows 600 watt peak power dissipation |
| MainDriver | 1 - 5.5" woven carbon fiber, cast basket, ribbon edge-wound voice coil and a Norsorex surround, hand made, picked for reference grade frequency response | 1 - 5.5" woven carbon fiber, cast basket, ribbon edge-wound voice coil and a Norsorex surround, hand made, picked for reference grade frequency response | 1 - 5.5" woven carbon fiber, cast basket, ribbon edge-wound voice coil and a Norsorex surround, hand made, picked for reference grade frequency response |
| Tweeter | 1 - 1" damped aluminum dome with transmission line chamber, extra heavy grade ferro fluid for cooling and damping | 1 - 1" damped aluminum dome with transmission line chamber, extra heavy grade ferro fluid for cooling and damping | 1 - 1" damped aluminum dome with transmission line chamber, extra heavy grade ferro fluid for cooling and damping |
| Rear Ambience |
1 - 1" ferro fluid cooled and damped synthetic dome | 1 - 1" ferro fluid cooled and damped synthetic dome | 1 - 1" aluminum rear ambience driver |
| Frequency Response | 26Hz - 25kHz -3dB (+/- 1dB in midrange) | 20Hz - 25kHz -3dB (+/- 1dB in midrange) | 20Hz - 25kHz -3dB (+/- 1dB in midrange) |
| Impedance | 6ohm nominal | 6ohm nominal | 7ohm nominal |
| Sensitivity | 87dB @ 1 watt, 1 meter | 90dB @ 1 watt, 1 meter | 91dB @ 1 watt, 1 meter |
| Power | Minimum - 25 watts rms Maximum - 250 watts rms Peak - 500 watts |
Minimum - 9 watts rms Maximum - 250 watts rms Peak - 600 watts |
|
| Finish | Standard - Black Faux Wood Grain Optional ( additional cost ) - Black Ash, Clear Oak, Red Cherry or Natural Cherry |
Standard - Clear Oak Optional ( additional cost ) - Red Cherry or Natural Cherry |
Natural High gloss cherry hardwood or Satin Dark Red Cherry Hardwood |
| Dimensions (h x w x d) | 43.5" x 12" x 16" 110.5cm x 30.5cm x 40.7cm |
46" x 13.5" x 19.5" 116.8cm x 33cm x 48.2cm |
46" x 11" x 19" |
| Weight | Each speaker - 85lbs empty, 115lbs sand loaded | Each speaker - 150lbs Woofer enclosure - 97lbs Midrange/Treble Enclosure - 53lbs |
Each speaker - 135lbs Woofer enclosure - 85lbs Midrange/Treble Enclosure - 50lbs |
| Warranty | 5 year transferable (parts and labor) with registration | 5 year transferable (parts and labor) with registration | 5 year transferable (parts and labor) with registration |
| Specifications | VR-4.5 | VR-6 | VR-8 | VR-10 |
| System Type | AIR™ (Acoustic Inversion Replication) | AIR™ (Acoustic Inversion Replication) | AIR™ (Acoustic Inversion Replication) | AIR™ (Acoustic Inversion Replication) |
| Circuit Type | GAIN™ with DRI™. Blend points | GAIN™ with DRI™. Blend points | GAIN™ with DRI™. Blend points | GAIN™ with servo- control Zobel impedance levelers |
| Enclosure Type | Two piece Stacking | Two piece Stacking | Two piece Stacking | Sealed, three piece stacking design, with Interlocked matrix bracing |
| Driver Compliment | Aperiodically damped with dual enclosures & dual rear vents | |||
| Bass Driver | 2 - 8" super-duty polypropylene with custom epoxy treated cone, rear cooling vent allows 600 watt peak power dissipation | 2 - 9" cast frame woofers with aluminum and kevlar honeycomb cones, 600 watt peak power dissipation | 1 - 13" cast frame bass drivers, 1 - 10" midbass cast frame | 1-18" Kevlar subwoofers, 2- 10" Kevlar midbass drivers |
| MainDriver | 1 - 5.5" woven carbon fiber, cast basket, ribbon edge-wound voice coil and a Norsorex surround, hand made, picked for reference grade frequency response | 2 - 5.5" woven carbon fiber, cast basket, ribbon edge-wound voice coil and a Norsorex surround, hand made, picked for reference grade frequency response | 2 - 5.5" woven carbon fiber, cast basket, ribbon edge-wound voice coil and a Norsorex surround, hand made, picked for reference grade frequency response | 4- 4.5" Kevlar midrange drivers |
| Tweeter | 1 - 1" damped aluminum dome with transmission line chamber, extra heavy grade ferro fluid for cooling and damping | 1 - Titanium inverse dome with Ferrofluid cooling | 1 - Titanium inverse dome with Ferrofluid cooling | 2- 1" Ceramic inverted dome tweeters, and 1- 4" ribbon supertweeters |
| Rear Ambience |
1 - 1" ferro fluid cooled and damped synthetic dome | 1 - Titanium inverse dome with Ferrofluid cooling | 1 - Titanium inverse dome with Ferrofluid cooling | |
| Frequency Response | 20Hz - 25kHz -3db (+/- 1dB in midrange) | 20hz - 35kHz -3db (+/- 1dB in midrange) | 16Hz - 35kHz -3db (+/- 1dB in midrange) | 10Hz - 50kHz -3dB (+/- 1dB in midrange) |
| Impedance | 6ohm nominal | 4ohm nominal | 4ohm nominal | 8 Ohms (subwoofer tower), 4 Ohms (main tower) |
| Sensitivity | 90dB @ 1 watt, 1 meter | 96dB @ 1 watt, 1 meter | 96dB @ 1 watt, 1 meter | 94dB @ 1 watt 1 meter |
| Power | Minimum - 9 watts rms Maximum - 250 watts rms Peak - 600 watts |
Minimum - 5 watts rms Peak - 500 watts |
Minimum - 9 watts rms Peak - 1,000 watts |
Maximum - 1,000 watts rms |
| Finish | Standard - Red Cherry or Natural Cherry end caps and hardwood bass enclosure with removable black cloth grille over bass drivers | Natural High gloss cherry hardwood or Satin Dark Red Cherry Hardwood | Natural High gloss cherry hardwood or Satin Dark Red Cherry Hardwood | Cherry, dark red or natural light, with high gloss. Black ash, with high gloss. Natural oak, birch, or maple, with satin or high gloss clearcoat. |
| Dimensions (h x w x d) | 46" x 13.5" x 19.5" 116.8cm x 33cm x 48.2cm |
52" x 16" x 23" | 65" x 18" x 28" | 74" x 16" x 24" each enclosure |
| Weight | Each speaker - 150lbs Woofer enclosure - 97lbs Midrange/Treble Enclosure - 53lbs |
Bass Module 110lbs Midrange Treble 65lbs | Each speaker - 500lbs | Each main speaker - 600lbs Each sub speaker - 450lbs |
| Warranty | 5 year transferable (parts and labor) with registration | 5 year transferable (parts and labor) with registration | 5 year transferable (parts and labor) with registration | 20 year transferable (parts and labor) with registration |